Part No
Image
Description
Price (Exc. VAT)
Price (Inc. VAT)
Qty
50230
New H.T. 10ft x 3.2mm Galvanised Tube
H.T. Galvanised Scaffold Tube
10ft / 3.0m in length.
48.3 x 3.2mm wall thickness.
Graded to EN10219.
Other lengths also available.
Show Description
From £10.63
From £12.76
50224
New H.T. 8ft x 3.2mm Galvanised Tube
H.T. Galvanised Scaffold Tube
8ft / 2.4m in length.
48.3 x 3.2mm wall thickness.
Graded to EN10219.
Other lengths also available.
Show Description
From £8.50
From £10.20
50218
New H.T. 6ft x 3.2mm Galvanised Tube
H.T. Galvanised Scaffold Tube
6ft / 1.8m in length.
48.3 x 3.2mm wall thickness.
Graded to EN10219.
Other lengths also available.
Show Description
From £6.38
From £7.66
50215
New H.T. 5ft x 3.2mm Galvanised Tube
H.T. Galvanised Scaffold Tube
5ft / 1.5m in length.
48.3 x 3.2mm wall thickness.
Graded to EN10219.
Other lengths also available.
Show Description
From £5.31
From £6.37
50212
New H.T. 4ft x 3.2mm Galvanised Tube
H.T. Galvanised Scaffold Tube
4ft / 1.2m in length.
48.3 x 3.2mm wall thickness.
Graded to EN10219.
Other lengths also available.
Show Description
From £4.25
From £5.10
50209
New H.T. 3ft x 3.2mm Galvanised Tube
H.T. Galvanised Scaffold Tube
3ft / 0.9m in length.
48.3 x 3.2mm wall thickness.
Graded to EN10219.
Other lengths also available.
Show Description
From £3.19
From £3.83
50206
New H.T. 2ft x 3.2mm Galvanised Tube
H.T. Galvanised Scaffold Tube
2ft / 0.6m in length.
48.3 x 3.2mm wall thickness.
Graded to EN10219.
Other lengths also available.
Show Description
From £2.13
From £2.56
50203
New H.T. 1ft x 3.2mm Galvanised Tube
H.T. Galvanised Scaffold Tube
1ft / 0.3m in length.
48.3 x 3.2mm wall thickness.
Graded to EN10219.
Other lengths also available.
Show Description
From £1.06
From £1.27
60750
Silver Zinc Spray 500ml Aerosol
ProSolve Silver Zinc Galvanising Spray is an excellent fast-drying primer to use on
Extremely fast drying for minimal delay Effective protection against corrosion
Show Description
From £3.95
From £4.74
101/4
101 Short Tee Tube Clamp 48.3mm - Size 4
A 90° tee connection between two tubes. Typical use is on straight and level guardrail to connect the vertical to the top rail or end/mid rail to the vertical. This Q clamp fitting cannot be used to join tubes in the top of the short tee. For this the Q clamp fitting 104 Long Tee should be used.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD Size 1: 26.9mm OD
Show Description
From £3.08
From £3.70
104/4
104 Long Tee Tube Clamp 48.3mm OD - Size 4
104-4 (D) Long Tee Tube Clamp 48.3mm OD
A 90° tee connection between 2 tubes. Typical use for this fitting is on straight and level guardrails to connect the vertical to the top rail. This tubeclamp can be used to join tubes in the top of the twin grubscrew long tee.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD Size 1: 26.9mm OD
Equivalent Tubeclamp Product References:
Interclamp: 104 Keeklamp: 25 Fastclamp: C04 Alvin: A4
Show Description
From £4.91
From £5.89
116/4
116 3 Way Through Corner Tube Clamp 48.3mm OD - Size 4
A 90° corner joint with the vertical passing through the fitting. Typical use is on straight and level guardrail for connecting the mid/lower rail to the vertical at a 90° corner. Can also be used in a similar way on other rectangular structures.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD Size 1: 26.9mm OD
Equivalent Tube Clamp Product References:
Interclamp: 116 Keeklamp: 21 Fastclamp: C21 Alvin: A20
Show Description
From £3.69
From £4.43
119/4
119 Two Socket Cross Tube Clamp 48.3mm OD - Size 4
A 90° joint between a vertical and two horizontals. Typical use on straight and level guardrail to connect the mid/lower rails to the upright. The vertical must remain continuous with cross rails cut. Normally used in conjunction with the fitting 104 Long Tee.
Also available in:
Size 3: 42.4mm OD Tube Size 2: 33.7mm OD Tube Size 1: 26.9mm OD Tube
Equivalent product references:
Interclamp: 119 Keeklamp: 26 Fastclamp: C22 Alvin: A22
Show Description
From £3.75
From £4.50
123/4
123 Acute Angle Elbow Tube Clamp 48.3mm OD - Size 4
Alternative to bending to form a connection between a sloping tube and an end post. Angle range from 40 degrees to 70 degrees.
Show Description
From £6.62
From £7.94
125/4
125 90 Degree Elbow Tube Clamp 48.3mm OD - Size 4
A 90° elbow. Typical use is to connect the end vertical to the top rail in straight and level guardrail. Can also be used to create a 90° tube bend.
Also available in:
Size 3: 42.4mm OD Tube Size 2: 33.7mm OD Tube Size 1: 26.9mm OD Tube
Equivalent product references:
Interclamp: 125 Keeklamp: 15 Fastclamp: C02 Alvin: A6
Show Description
From £3.17
From £3.80
125H/4
125H Swivel Elbow Tube Clamp 48.3mm OD - Size 4
Variable inline elbow. Typical use is to connect the end vertical to the top rail at a variable angle up to 202 degrees.
Also available in:
Size 3: 42.4mm OD Tube Size 2: 42.4mm OD Tube
Equivalent product references:
Interclamp: 166 Keeklamp: BC53
Show Description
From £6.33
From £7.60
128/4
128 3 Way 90 Degree Elbow Tube Clamp 48.3mm OD - Size 4
A 3 way enclosed 90° corner joint. Typical use is on a straight and level guardrail at a 90° corner where an upright is in position. This fitting can also be used to create enclosed corner joints in other square structures such as benches etc.
Also available in:
Size 3: 42.4mm OD Tube Size 2: 33.7mm OD Tube Size 1: 26.9mm OD Tube
Equivalent product references:
Interclamp: 128 Keeklamp: 20 Fastclamp: C20 Alvin: A18
Show Description
From £4.76
From £5.71
129/4
129 Adjustable Tee Tube Clamp 48.3mm OD - Size 4
Freely adjustable tee between 40° and 60°. Typical use is a tee connection on angled top rails on steeper slopes or stairs with the upright remaining vertical. This fitting can also be used for bracing on structures. This fitting has no ability to join tubes. An alternative for this situation is the fitting 127.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 129 Keeklamp: 29 Fastclamp: C29 Alvin: A3
Show Description
From £3.99
From £4.79
130/4
130 Adjustable Cross Tube Clamp 48.3mm OD - Size 4
Freely adjustable cross between 30° and 45°. Typical use is as a cross connection on angled mid/lower rails on steeper slopes or stairs with the upright remaining vertical. The upright must remain continuous with the cross rails being cut. Not recommended for use on the top of the vertical.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 130 Keeklamp: 30 Fastclamp: C28 Alvin: A23
Show Description
From £7.88
From £9.46
131/4
131 Wall Plate Tube Clamp 48.3mm OD - Size 4
With 4 countersunk holes, this fitting is ideal as a flange to terminate handrail to a wall or other similar application. This fitting may be used on structures where it is only required as a positional fixing.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD Size 1: 26.9mm OD
Equivalent product references:
Interclamp: 131 Keeklamp: 61 Fastclamp: C11 Alvin: A10
Show Description
From £3.59
From £4.31
131S/4
131S Square Wall Plate Tube Clamp 48.3mm OD - Size 4
T h is d e s i g n i s i d e a l a s a f l a n g e f o r t e r m i n a t i n g r a i l s t o a w a l l o r s i m i l a r s t r u c t u r e s . I t c a n b e u s e d a s a b a s e f l a n g e f o r n o n l o a d b e a r i n g s t r u c t u r es .
If needed the tube can pass through the fitting completely
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Show Description
From £3.75
From £4.50
132/4
132 Base Plate Tube Clamp 48.3mm OD - Size 4
A structural base plate for all aspects of vertical post support. This fitting when used as a base plate for guardrailing should always be positioned with the holes across the line of the guardrail to give maximum strength. The holes in the base plate are large enough to enable the use of mechanical or chemical anchor fixings.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD Size 1: 26.9mm OD
Equivalent product references:
Interclamp: 132 Keeklamp: 62 Fastclamp: C12 Alvin: A12
Show Description
From £5.52
From £6.62
133/4
133 Plastic Stop End Tube Clamp 48.3mm OD - Size 4
A plastic stop end for use in the end of tubes. The stop end can be used in either medium or heavy gauge tube. This is only a friction fit and for a more permanent fix as an adhesive is recommended.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 133 Keeklamp: 84 Fastclamp: C65 Alvin: A68
Place in hot water prior to fixing to avoid shattering/breaking.
Show Description
From £0.30
From £0.36
134/4
134 Ground Socket Tube Clamp 48.3mm OD - Size 4
A ground socket cast into concrete which is flush to the finished ground level. The upright is held in place using the grubscrew but can easily be removed without leaving any obstructions.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 134 Keeklamp: 66 Fastclamp: C17 Alvin: A17
Show Description
From £15.95
From £19.14
135/4
135 Clamp On Tee Tube Clamp 48.3mm OD - Size 4
Inline Add on Tee. Used for making additions to, upgrading or modifying an existing structure without having the need to dismantle part or all of that structure.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 135 Keeklamp: 16 Fastclamp: C41 Alvin: A32
Show Description
From £4.88
From £5.86
136/4
136 Add On Tee Tube Clamp 48.3mm OD - Size 4
The add on tee enables a structure to be extended, avoiding the need for dismantling.
Also available in:
Equivalent product references:
Interclamp: 136 Keeklamp: A10 Fastclamp: CA03
WARNING: THIS CLAMP SHOULD NOT BE USED TO JOIN LENGTHS OF TUBE.
Show Description
From £5.37
From £6.44
138/4
138 Gate Eye Tube Clamp 48.3mm OD - Size 4
Female section of a 2 part gate hinge. Used in conjunction with fitting reference 140.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD Size 1: 26.9mm OD
Equivalent product references:
Interclamp: 138 Keeklamp: 78 Fastclamp: C31 Alvin: A60
Show Description
From £2.07
From £2.48
140/4
140 Gate Hinge Tube Clamp 48.3mm OD - Size 4
Male section of a 2 part gate hinge. Used in conjunction with fitting reference 138.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD Size 1: 26.9mm OD
Equivalent product references:
Interclamp: 140 Keeklamp: 83 Fastclamp: C32 Alvin: A62
Show Description
From £2.18
From £2.62
143/4
143 Wall Mount Tube Clamp for Handrail 48.3mm OD - Size 4
Wall mounting bracket for handrails. Can also be used to tie back structures to wall or to hold kicking plates on a guardrail. This fitting has countersunk holes and is not recommended as a structural fixing. This fitting has no ability to join tubes.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 143 Keeklamp: 70 Fastclamp: C16 Alvin: A34
Show Description
From £3.62
From £4.34
144/4
144 Offset Side Palm Fixing Tube Clamp 48.3mm OD - Size 4
144-4 (D) Offset Side Palm Fixing Tube Clamp 48.3mm OD
Structural offset side palm base fixing guardrailing to walls, steps, ramps, etc. The tube is unable to pass through the fitting as supplied, should this be required then the base must be reamed out. Access to the top fixing is restricted. It is recommended that a threaded stud is fixed first with a maximum projection of 25mm.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 144 Keeklamp: 64 Fastclamp: C13 Alvin: A14
Show Description
From £6.87
From £8.24
145/4
145 Non Structural Offset Side Palm Fixing Tube Clamp 48.3mm OD - Size 4
145-4 (D) Non Structural Offset Side Palm Fixing Tube Clamp 48.3mm OD
This Tube Clamp is designed for palm fixing guardrailing and balustrading to walls, parapets, steps and ramps.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent Tubeclamp product references:
Interclamp: 145 Keeklamp: 65 Fastclamp: C14 Alvin: A16
Show Description
From £7.07
From £8.48
146/4
146 Flush Side Palm Fixing Tube Clamp 48.3mm OD - Size 4
Structural flush side palm base fixing for fixing guardrailing to wall steps or ramps etc. The flush design enables posts to be tight to the structure. The tube is unable to pass though the fitting. Should this be required then the base must be reamed out. If the base is reamed out the bottom fixing will become redundant.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 146 Keeklamp: 68 Fastclamp: C15 Alvin: A15
Show Description
From £6.57
From £7.88
147/4
147 Offset Swivel Tee Tube Clamp 48.3mm OD - Size 4
An internal swivel tee used in conjunction with other fittings in the range to create a 360° swivel joint. Ideal use on handrail or offset guardrailing down variable angled slopes. Eliminates the requirement for specialised angle fittings.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 147 Keeklamp: 114 Fastclamp: C06 Alvin: A31
Show Description
From £3.86
From £4.63
148/4
148 Short Swivel Inline Tee Tube Clamp 48.3mm OD - Size 4
Shown as a pair, priced and sold as a single fitting but normally used in pairs to create angles between 85° and 235°. A central tube is required to join the fittings together to create the angle. When working out the correct tube length care should be taken.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 148 Keeklamp: 19 Fastclamp: C25 Alvin: A21
Show Description
From £2.97
From £3.56
149/4
149 Inline External Connector Tube Clamp 48.3mm OD Size 4
An inline external tube connector for joining two tubes of the same diameter. This fitting is not recommended to be used in high load applications. For a smooth inline joint the fitting 150 can be used.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD Size 1: 26.9mm OD
Equivalent product references:
Interclamp: 149 Keeklamp: 14 Fastclamp: C00 Alvin: A8
Show Description
From £2.79
From £3.35
150/4
150 Inline Internal Connector Tube Clamp 48.3mm OD - Size 4
An inline internal tube connector for joining two tubes of the same diameter. This fitting can only be used with 3.2mm thick tube. This fitting is not recommended for high or tensile load applications. For 4.0mm scaffold tube please use a standard joint pin from the conventional scaffolding page.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD Size 1: 26.9mm OD
Equivalent product services:
Interclamp: 150 Keeklamp: 18 Fastclamp: C01 Alvin: A9
Show Description
From £2.79
From £3.35
158/4
158 4 Way Cross Tube Clamp 48.3mm OD - Size 4
A 4 way cross that enables the vertical to pass through the centre of the fitting with the 4 horizontal tubes joining at 90° to each other. Ideal for structures with multiple verticals. The vertical must remain continuous with the cross rails being cut.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 158 Keeklamp: 40 Fastclamp: C24 Alvin: A26
Show Description
From £6.63
From £7.96
160/4
160 Offset Clamp on Tee Tube Clamp 48.3mm OD - Size 4
Offset add on tee. Used for making additions to, upgrading or modifying an existing structure without having the need to dismantle part or all of that structure.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 160 Keeklamp: 17 Fastclamp: C42
Show Description
From £2.66
From £3.19
161/4
161 Offset 90 Degree Crossover Tube Clamp 48.3mm OD - Size 4
A 90° offset crossover fitting. The tube is unable to be jointed within this fitting. Ideal applications are for racking systems or offset guardrail.
Also available in:
Size 3: 44.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 161 Keeklamp: 45 Fastclamp: C40 Alvin: A28
Show Description
From £2.76
From £3.31
165/4
165 Combination Socket Tube Clamp 48.3mm OD - Size 4
A combination fitting designed for use in the construction of racking systems. The fitting enables the connection of a vertical upright at 90° to 2 horizontal rails, one being the tie rail, the other being the load rail. On pallet racking the upright normally has the load rail on the inside, whilst for shelved racking the upright normally has the load rail on the outside.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 165 Keeklamp: 46 Fastclamp: C43 Alvin: A30
Show Description
From £4.40
From £5.28
166/4
166 Adjustable Knuckle Tube Clamp 48.3mm OD - Size 4
A versatile fitting, often used where a horizontal rail is joined to a sloping section. Once the desired angle is obtained, the knuckle is secured with a standard setscrew
Show Description
From £10.71
From £12.85
167/4
167 Double Inline Swivel Tube Clamp 48.3mm OD - Size 4
Complete double swivel with the swivel connectors at 180° to each other. Each swivel has a travel of approximately 85° from the horizontal on both vertical directions.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 167 Keeklamp: C51 Fastclamp: C47 Alvin: A46
Show Description
From £7.38
From £8.86
167M/4
167M Double Male Inline Swivel Tube Clamp 48.3mm OD - Size 4
A double male fitting with the lugs at 180° to each other.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 167M Keeklamp: M51 Fastclamp: C37 Alvin: A38
Show Description
From £2.46
From £2.95
168/4
168 Corner Swivel Tube Clamp 48.3mm OD - Size 4
Complete double swivel with the swivel connectors at 90° to each other. Each swivel has a travel of approximately 85° from the horizontal on both vertical directions.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 168 Keeklamp: C52 Fastclamp: C48 Alvin: A48
Show Description
From £7.95
From £9.54
168M/4
168M Male Corner Swivel Tube Clamp 48.3mm OD - Size 4
90° Male Corner Swivel,double male fitting with the 2 lugs at 90° to each other.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 168M Keeklamp: M52 Fastclamp: C38 Alvin: A40
Show Description
From £3.39
From £4.07
169/4
169 Swivel Locating Flange Tube Clamp 48.3mm OD - Size 4
Complete locating swivel. Swivel has a travel of approximately 85° from the vertical in each direction.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 169 Keeklamp: C58 Fastclamp: C46 Alvin: A52
Show Description
From £4.40
From £5.28
170/4
170 Single Mesh Panel Clip Tube Clamp 48.3mm OD - Size 4
Single location weldmesh panel clip. The slotted design of the panel clip enables adjustment in the location of the mesh panels. Supplied with M6 x 30mm long nut and bolt.This fitting can also be used to locate other materials up to 10mm thick provided the safety saddle is removed.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product services:
Interclamp: 169 Keeklamp: C58 Fastclamp: C46 Alvin: A52
Show Description
From £0.80
From £0.96
171/4
171 Double Mesh Panel Clip Tube Clamp 48.3mm OD - Size 4
Double location weldmesh panel clip. The slotted design of the panel clip enables adjustment in the location of the mesh panels. Supplied with M6 x 30mm long nut and bolt. This fitting can also be used to locate other materials up to 10mm thick provided the safety saddle is removed.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 171 Keeklamp: 82 Fastclamp: C67 Alvin: A72
Show Description
From £1.04
From £1.25
173/4
173 Single Swivel Tube Clamp 48.3mm OD - Size 4
Complete single swivel. The swivel has a travel of approximately 85° from the horizontal in both vertical directions.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 173 Keeklamp: C50 Fastclamp: C45 Alvin: A44
Show Description
From £4.22
From £5.06
173F/4
173F Female Swivel Tube Clamp 48.3mm OD - Size 4
This fitting is designed to be used in conjunction with the ‘M’ fittings and is not generally used on its own. This can be connected to the ‘M’ fitting by either rivet or nut and bolt.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD Size 1: 26.9mm OD
Equivalent product references:
Interclamp: 173F Keeklamp: F50 Fastclamp: C36 Alvin: A42
Show Description
From £2.37
From £2.84
173M/4
173M Single Male Swivel Tube Clamp 48.3mm OD - Size 4
Single male fitting with only 1 lug.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 173M Keeklamp: M50 Fastclamp: C35 Alvin: A36
Show Description
From £2.15
From £2.58
174/4
174 Single Swivel Tee Tube Clamp 48.3mm OD - Size 4
A versatile swivel fitting, often used for braces and where staircase middle rails join level sections. The through tube cannot be joined within the fitting. The assembly is riveted together.
WARNING : To provide sufficient stability, whole structures must not be made from swivell fitting alone.
Only available in:
Show Description
From £6.60
From £7.92
175/4
175 Single Swivel Elbow Tube Clamp 48.3mm OD - Size 4
A versatile swivel fitting, often used for braces and where staircase top rails join level sections. The assembly is riveted together.
WARNING : To provide sufficient stability, whole structures must not be made from swivell fitting alone.
Only available in:
Show Description
From £7.49
From £8.99
176/4
176 3 Way Outlet Tee Tube Clamp 48.3mm OD - Size 4
3 way tee used to join 3 tubes at 90° to each other with the vertical passing through the fitting. Typical use would be on structures such as market stall or play frames.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD Size 1: 26.9mm OD
Equivalent product references:
Interclamp: 176 Keeklamp: 35 Fastclamp: C23 Alvin: A24
Show Description
From £5.52
From £6.62
179/4
179 Locking Collar Tube Clamp 48.3mm OD - Size 4
A locking collar used as an extra support for a fitting on structures where the slip load on the grub screw may be exceeded, ie: racking. Can also be used to support a fitting that is required to be left undone, ie: a gate hinge.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD Size 1: 26.9mm OD
Equivalent product references:
Interclamp: 179 Keeklamp: 75 Fastclamp: C30 Alvin: A58
Show Description
From £1.85
From £2.22
182/4
182 Hook Tube Clamp 48.3mm OD - Size 4
Chain hook. Used to locate chains across openings. Not ideal for permanent chain location. Recommended that one end of the chain is fixed using a fitting reference 173M and held in place with a nut and bolt.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 182 Keeklamp: 76 Fastclamp: C33 Alvin: A64
Show Description
From £1.98
From £2.38
184/4
184 Metal Plug Tube Clamp 48.3mm OD - Size 4
Metal Plug - Tube Cap
Also available in:
Size 3: 48.3mm OD Size 2: 42.4mm OD
Equivalent product references:
Interclamp: 133 Keeklamp: 84
ONLY COMPATIBLE WITH 3.2MM WALL TUBE.
Show Description
From £1.59
From £1.91
185/4
185 Eaves Fitting Tube Clamp 48.3mm OD - Size 4
Eaves Fitting
Designed for use in conjunction with the 191 for roofing applications on small structures.
Equivalent product references:
Interclamp: 185 Keeklamp: 350 Fastclamp: C56
Show Description
From £8.07
From £9.68
191/4
191 Ridge Fitting Tube Clamp 48.3mm OD - Size 4
Ridge Fitting
Designed for use in conjunction with the 185 for roofing applications on small structures.
Equivalent product references:
Interclamp: 191 Keeklamp: 351 Fastclamp: C55
Show Description
From £6.71
From £8.05
198/4
198 Fixing Bracket Double Sided Tube Clamp 48.3mm OD - Size 4
Wall mounting bracket for handrails. Can also be used to tie back structures to wall or to hold kicking plates on a guardrail. This fitting has countersunk holes and is not recommended as a structural fixing. This fitting has no ability to join tubes.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Hole size approx 10mm.
Equivalent product references:
Show Description
From £3.09
From £3.71
199/4
199 Fixing Bracket Single Sided Tube Clamp 48.3mm OD - Size 4
Wall mounting bracket for handrails. Can also be used to tie back structures to wall or to hold kicking plates on a guardrail. This fitting has countersunk holes and is not recommended as a structural fixing. This fitting has no ability to join tubes.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Hole size approx 10mm.
Equivalent product references:
Interclamp: 199 Fastclamp: C34
Show Description
From £2.46
From £2.95
201/4
201 Slope Range Short Tee Tube Clamp 48.3mm OD - Size 4
Slope Range Short Tee Tubeclamp - 0 - 11°
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 153 Keeklamp: 86 Fastclamp: C51 Alvin: G02
Show Description
From £4.16
From £4.99
204/4
204 Slope Range Long Tee Tube Clamp 48.3mm OD - Size 4
Slope Range Long Tee - 0° - 11°
An adjustable tee connection between two tubes. Used on ramps and shallow gradient guardrail between verticals and top rails. This fitting can be used to joint tubes in the long tee.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 155 Keeklamp: 88 Fastclamp: C52 Alvin: G04
Show Description
From £6.06
From £7.27
219/4
219 Slope Range Socket Cross Tube Clamp 48.3mm OD - Size 4
Slope Range Socket Cross 0° to 11°
An adjustable cross for connecting tubes between mid/lower rails and the vertical on ramps or shallow gradients. The vertical must remain continuous with the cross rails being cut.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 156 Keeklamp: 89 Fastclamp: C54 Alvin: G22
Show Description
From £5.39
From £6.47
224/4
224 Variable Angle Connector Tube Clamp 48.3mm OD - Size 4
A variable angle in line connector – 15° - 60°. Ideally suited for use between the vertical end post and sloping top rail on stair guard railing.
Equivalent product references:
Interclamp: 124 Keeklamp: 55-8 Fastclamp: C05 Alvin: A7
Show Description
From £5.42
From £6.50
225/4
225 Slope Range Elbow Tube Clamp 48.3mm OD - Size 4
Slope Range Elbow 0° to 11°
An adjustable elbow. Used for the connection of the first vertical post at the start of the incline to the top rail. Only one barrel has the ability to take the adjustability, the other is fixed.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 154 Keeklamp: 87 Fastclamp: C50 Alvin: G06
Show Description
From £4.67
From £5.60
232/4
232 Slope Range Base Tube Clamp 48.3mm OD - Size 4
Slope Range Base 0° to 11°
An adjustable structural base fitting for the vertical. The design of this fitting will only allow it to be installed in the correct plane.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Equivalent product references:
Interclamp: 152 Keeklamp: 67 Fastclamp: C53 Alvin: G12
Show Description
From £6.17
From £7.40
242/4
242 Base Flange Tube Clamp with Toe Board Fixing 48.3mm OD - Size 4
A base flange fitting with toe board attachment lugs. It is ideal as a base for the vertical on guardrails where the addition of a toe board or kicking flat is required.
Also available in:
Equivalent product references:
Keeklamp: 69 Fastclamp: C18 DC Iron KC242
Show Description
From £21.39
From £25.67
247/4
247 Base Flange Tube Clamp with Kick Plate 48.3mm OD - Size 4
Ideal for guardrailing and balustrading applications where the addition of a kick plate is required. The slotted holes allow for adjustment and ease of fitting.
Please note: Due to the nature of these galavanised castings the measurements given here cannot be precise. We therefore do not recommend that any bolt holes are pre-drilled prior to installation of these fittings.
Also available in:
Equivalent product references:
Keeklamp: 69 Fastclamp: C18
Show Description
From £10.38
From £12.46
101/4/2
101 Reducing Short Tee Tube Clamp - Size 4 to Size 2
101/4/2 Tube Clamp ia a 90° tee connection between two tubes, 48.3mm OD and 33.7mm OD. Typical use of this Tube Clamp is on straight and level handrail / guardrail to connect the vertical to the top rail or end/mid rail to the vertical.
Also available in:
Size 3 to 2 : 42.4mm to 33.7mm OD Size 4 to 3 : 48.3mm to 42.4mm OD
Show Description
From £3.11
From £3.73
101/4/3
101 Reducing Short Tee Tube Clamp - Size 4 to Size 3
101/4/3 Tube Clamp ia a 90° tee connection between two tubes, 48.3mm OD and 42.4mm OD. Typical use of this Tube Clamp is on straight and level handrail / guardrail to connect the vertical to the top rail or end/mid rail to the vertical.
Also available in:
Size 3 to 2 : 42.4mm to 33.7mm OD
Show Description
From £3.11
From £3.73
161/4/2
161 Offset Crossover Reducing Clamp Size 4 to Size 2
A 90° offset reducing crossover fitting. The tube is unable to be jointed within this fitting. Ideal applications are for racking systems or offset guardrail where two different size tubes are being used
Also available in:
Size 4: 48.3mm OD to Size 3: 42.4mm OD
Show Description
From £2.76
From £3.31
161/4/3
161 Offset Crossover Reducing Tube Clamp Size 4 to Size 3
A 90° offset reducing crossover fitting. The tube is unable to be jointed within this fitting. Ideal applications are for racking systems or offset guardrail where two different size tubes are being used
Also available in:
Size 4: 48.3mm OD to Size 2: 33.7mm OD
Show Description
From £3.63
From £4.36
235/4
Allen Key - Size 4/3
Hexagonal key. The allen key is the only tool required to tighten up a fitting. The use of the duel ratchet fitting reference 233 is recommended to achieve the required torque.
Also available in:
Size 2/1
Show Description
£1.50
£1.80
GS/4
Grub Screw - Size 4/3
Electro plated case hardened grub screws. These grub screws are supplied pre fitted into the fittings.
Grub screw available in Size 4/3 and 2/1.
Show Description
From £0.53
From £0.64
233
Tube Clamp Ratchet - Universal
The ratchet comes with 2 hexagon socket heads to enable the complete range of fittings to be tightened. The use of the ratchet enables the grubscrews to be tightened to the correct torque.
8mm Hex Head for Size 4 and 3 Tube Clamps 6mm Hex Head for Size 2 and 1 Tube Clamps High Quality Teng Tools Ratchet
Show Description
£49.95
£59.94
11010
New 4 ton Screw Jack
Screw Jacks locate in the bottom of the standards, they provide adjustment for variations in ground levels.
Safe working load of approx 4 tons each.
Overall Height approx 650mm, Adjustable Range approx 500mm
Approx 38mm OD.
Plate approx 150 x 150 x 5mm.
Show Description
From £5.60
From £6.72
050754U
75mm Castor Wheel Unbraked 48.3mm OD - Size 4
A 75mm Dia TPR on Polypropylene centre wheel unbraked swivel castor complete with Expander to fit 48.3mm OD / Size 4 Tubeclamp tube.
Safe Working Load: 75 kg per castor
Tread Size: 25mm
Hub: 28mm
Bore: 8mm
Bolt Hole Size: 11mm
Overall Height: 100mm
Also available in tube sizes and Dia 100mm
Size 3 : 42.4mm OD Size 2: 33.7mm OD Size 1 : 26.9mm OD
Show Description
£4.85
£5.82
050754B
75mm Castor Wheel Braked 48.3mm OD - Size 4
A 75mm Dia TPR on Polypropylene centre wheel braked swivel castor complete with Expander to fit 48.3mm OD / Size 3 Tubeclamp tube.
Safe Working Load: 75 kg per castor
Tread Size: 25mm
Hub: 28mm
Bore: 8mm
Bolt Hole Size: 11mm
Overall Height: 100mm
Also available in tube sizes and Dia 100mm
Size 3 : 42.4mm OD Size 2 : 33.7mm OD Size 1 : 26.9mm OD
Show Description
£8.50
£10.20
051004U
100mm Castor Wheel Unbraked 48.3mm OD - Size 4
A 100mm Dia TPR on Polypropylene centre wheel unbraked swivel castor complete with Expander to fit 48.3mm OD / Size 4 Tubeclamp tube
Safe Working Load: 100 kg per castor
Tread Size: 32mm
Hub: 36mm
Bore: 12mm
Bolt Hole Size: 11mm
Overall Height: 135mm
Also available in tube sizes and Dia 75mm
Size 3 : 42.4mm OD Size 2 : 33.7mm OD Size 1 : 26.9mm OD
Show Description
£8.50
£10.20
051004B
100mm Castor Wheel Braked 48.3mm OD - Size 4
A 100mm Dia TPR on Polypropylene centre wheel braked swivel castor complete with Expander to fit 48.3mm OD / Size 4 Tubeclamp tube.
Safe Working Load: 100 kg per castor
Tread Size: 32mm
Hub: 36mm
Bore: 12mm
Bolt Hole Size: 11mm
Overall Height: 135mm
Also available in tube sizes and Dia 100mm
Size 3 : 42.4mm OD Size 2 : 33.7mm OD Size 1 : 26.9mm OD
Show Description
£10.00
£12.00
252Z/4
252Z Slope Base Flange 11-29° Tube Clamp 48.3mm OD - Size 4
Slope Base Flange 11° to 29°
Used for handrails on slopes and used for ramp uprights
Equivalent product references:
Interclamp: Keeklamp: Fastclamp: Alvin:
Show Description
£5.00
£6.00
253Z/4
253Z Slope Short Tee Tube Clamp 48.3mm OD - Size 4
Slope Short Tee 11 - 29°
Used as a butt joint for sloping sites
Equivalent product references:
Interclamp: Keeklamp: Fastclamp: Alvin:
Show Description
£4.50
£5.40
255Z/4
255Z Slope Long Tee Tube Clamp 48.3mm OD - Size 4
Slope Long Tee 11 - 29°
Used as a butt joint for sloping sites
Equivalent product references:
Interclamp: Keeklamp: Fastclamp: Alvin:
Show Description
£5.50
£6.60
256Z/4
256Z Slope Cross Mid Rail Tube Clamp 48.3mm OD - Size 4
Slope Cross Midrail 11 - 29°
Used as a cross joint for sloping sites
Equivalent product references:
Interclamp: Keeklamp: Fastclamp: Alvin:
Show Description
£5.30
£6.36
252N/4
252N Narrow Slope Base Flange 0-11° Tube Clamp 48.3mm OD - Size 4
Narrow Slope Base Flange 0° to 11°
Used for handrails on slopes and used for ramp uprights
Equivalent product references:
Interclamp: Keeklamp: Fastclamp: Alvin:
Show Description
£8.10
£9.72
Kit1
Kitchen Side Table - Kit
Kitchen table, made with tubes from scaffolding.
Tables with extra storage room on shelves under the tabletop. Construction drawing for side tables and taller dining kitchen table. Scaffold tube furniture. Kitchen table made with scaffold pipes ( Shelves/Boards not supplied )
Use this construction drawing as a base example to make tables of many sizes and shapes.
Show Description
£100.00
£120.00
246/4
246 Horizontal Railing Base Tube Clamp 48.3mm OD - Size 4
Designed for palm fixing of guardrail and balustrades to walls, parapets, steps and ramps. The upright cannot drop through the socket.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
Size 3: 42.4mm OD Size 2: 33.7mm OD
Show Description
From £7.19
From £8.63
