| Part No |
Image |
Description |
Price (Exc. VAT) |
Price (Inc. VAT) |
Qty |
|
05653
|
|
6.4m Tube Clamp Tube 42.4mm OD - Size 3
We can supply tube in various lengths in sizes 1, 2, 3 & 4 to fit the Tubeclamps that we supply.
Wall thickness is approx 3.2mm
We can supply in 6.4m lengths, ask for details
- Size 4 : 48.3mm OD
- Size 3 : 42.4mm OD
- Size 2 : 33.7mm OD
- Size 1 : 26.9mm OD
Show Description
|
£32.00
|
£38.40
|
|
|
05303
|
|
3.0m Tube Clamp Tube 42.4mm OD - Size 3
We can supply tube in 3.0m lengths in sizes 1, 2, 3 & 4 to fit the Tube Clamps that we supply.
Wall thickness is approx 3.2mm.
We can supply in 6.5m lengths, ask for details.
Also available in:
- Size 4 : 48.3mm OD
- Size 2 : 33.7mm OD
- Size 1 : 26.9mm OD
Show Description
|
From £15.00
|
From £18.00
|
|
|
05203
|
|
2.0m Tube Clamp Tube 42.4mm OD - Size 3
We can supply tube in 2.0m lengths in sizes 1, 2, 3 & 4 to fit the Tube Clamps that we supply.
Wall thickness is approx 3.2mm.
We can supply in 6.5m lengths, ask for details.
Also available in:
- Size 4 : 48.3mm OD
- Size 2 : 33.7mm OD
- Size 1 : 26.9mm OD
Show Description
|
From £10.00
|
From £12.00
|
|
|
05153
|
|
1.5m Tube Clamp Tube 42.4mm OD - Size 3
We can supply tube in 1.5m lengths in sizes 1, 2, 3 & 4 to fit the Tubeclamps that we supply.
Wall thickness is approx 3.2mm.
We can supply in 6.5m lengths, ask for details.
Also available in:
- Size 4 : 48.3mm OD
- Size 2 : 33.7mm OD
- Size 1 : 26.9mm OD
Show Description
|
From £7.50
|
From £9.00
|
|
|
05103
|
|
1.0m Tube Clamp Tube 42.4mm OD - Size 3
We can supply tube in 1.0m lengths in sizes 1, 2, 3 & 4 to fit the Tube Clamps that we supply.
Wall thickness is approx 3.2mm.
We can supply in 6.5m lengths, ask for details.
Also available in:
- Size 4 : 48.3mm OD
- Size 2 : 33.7mm OD
- Size 1 : 26.9mm OD
Show Description
|
From £5.00
|
From £6.00
|
|
|
60750
|
|
Silver Zinc Spray 500ml Aerosol
ProSolve Silver Zinc Galvanising Spray is an excellent fast-drying primer to use on
untreated and welded metal. It has high adhesion and filling properties. Touch dry in
20-30 minutes. Offers excellent protection against corrosion. Can be used as a touch-up
for marred, hot galvanised surfaces. It protects iron, piping, ducts, water tanks,
automotive and marine parts etc
- Extremely fast drying for minimal delay
- Effective protection against corrosion
Show Description
|
From £3.95
|
From £4.74
|
|
|
101/3
|
|
101 Short Tee Tube Clamp 42.4mm OD - Size 3
A 90° tee connection between two tubes. Typical use is on straight and level guardrail to connect the vertical to the top rail or end/mid rail to the vertical. This fitting cannot be used to join tubes in the top of the short tee, for this the fitting 104 Long Tee should be used.
Also available in:
- Size 4 : 48.3mm OD
- Size 2 : 33.7mm OD
- Size 1 : 26.9mm OD
Equivalent product references:
- Interclamp: 101
- Keeklamp: 10
- Fastclamp: C03
- Alvin: A2
Show Description
|
From £2.24
|
From £2.69
|
|
|
104/3
|
|
104 Long Tee Tube Clamp 42.4mm O.D. - Size 3
A 90° tee connection between 2 tubes. Typical use is on straight and level guardrail to connect the vertical to the top rail. This fitting can be used to join tubes in the top of the twin grubscrew long tee.
Also available in:
- Size 4: 48.3mm OD Tube
- Size 2: 33.7mm OD Tube
- Size 1: 26.9mm OD Tube
Equivalent product references:
- Interclamp: 104
- Keeklamp: 25
- Fastclamp: C04
- Alvin: A4
Show Description
|
From £3.80
|
From £4.56
|
|
|
116/3
|
|
116 3 Way Through Corner Tube Clamp 42.4mm OD - Size 3
A 90° corner joint with the vertical passing through the fitting. Typical use is on straight and level guardrail for connecting the mid/lower rail to the vertical at a 90° corner. Can also be used in a similar way on other rectangular structures.
Also available in:
- Size 4: 48.3mm OD Tube
- Size 2: 33.7mm OD Tube
- Size 1: 26.9mm OD Tube
Equivalent product references:
- Interclamp: 116
- Keeklamp: 21
- Fastclamp: C21
- Alvin: A20
Show Description
|
From £3.03
|
From £3.64
|
|
|
119/3
|
|
119 Two Socket Cross Tube Clamp 42.4mm OD - Size 3
A 90° joint between a vertical and two horizontals. Typical use on straight and level guardrail to connect the mid/lower rails to the upright. The vertical must remain continuous with cross rails cut. Normally used in conjunction with the fitting 104 Long Tee.
Also available in:
- Size 4: 48.3mm OD Tube
- Size 2: 33.7mm OD Tube
- Size 1: 26.9mm OD Tube
Equivalent product references:
- Interclamp: 119
- Keeklamp: 26
- Fastclamp: C22
- Alvin: A22
Show Description
|
From £3.33
|
From £4.00
|
|
|
125/3
|
|
125 90 Degree Elbow Tube Clamp 42.4mm OD - Size 3
A 90° elbow. Typical use is to connect the end vertical to the top rail in straight and level guardrail. Can also be used to create a 90° tube bend.
Also available in:
- Size 4: 48.3mm OD Tube
- Size 2: 33.7mm OD Tube
- Size 1: 26.9mm OD Tube
Equivalent product references:
- Interclamp: 125
- Keeklamp: 15
- Fastclamp: C02
- Alvin: A6
Show Description
|
From £2.76
|
From £3.31
|
|
|
125H/3
|
|
125H Swivel Elbow Tube Clamp 42.4mm OD - Size 3
Variable inline elbow. Typical use is to connect the end vertical to the top rail at a variable angle up to 202 degrees.
Also available in:
- Size 4: 48.3mm OD Tube
- Size 2: Available by special order
Equivalent product references:
- Interclamp: 166
- Keeklamp: BC53
Show Description
|
From £6.33
|
From £7.60
|
|
|
128/3
|
|
128 3 Way 90 Degree Elbow Tube Clamp 42.4mm OD - Size 3
A 3 way enclosed 90° corner joint. Typical use is on a straight and level guardrail at a 90° corner where an upright is in position. This fitting can also be used to create enclosed corner joints in other square structures such as benches etc.
Also available in:
- Size 4: 48.3mm OD Tube
- Size 2: 33.7mm OD Tube
- Size 1: 26.9mm OD Tube
Equivalent product references:
- Interclamp: 128
- Keeklamp: 20
- Fastclamp: C20
- Alvin: A18
Show Description
|
From £3.86
|
From £4.63
|
|
|
129/3
|
|
129 Adjustable Tee Tube Clamp 42.4mm OD - Size 3
Freely adjustable tee between 40° and 60°. Typical use is a tee connection on angled top rails on steeper slopes or stairs with the upright remaining vertical. This fitting can also be used for bracing on structures. This fitting has no ability to join tubes. An alternative for this situation is the fitting 127.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interlink: 129
- Keeklamp: 29
- Fastclamp: C29
- Alvin: A3
Show Description
|
From £3.56
|
From £4.27
|
|
|
130/3
|
|
130 Adjustable Cross Tube Clamp 42.4mm OD - Size 3
Freely adjustable cross between 30° and 45°. Typical use is as a cross connection on angled mid/lower rails on steeper slopes or stairs with the upright remaining vertical. The upright must remain continuous with the cross rails being cut. Not recommended for use on the top of the vertical.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Show Description
|
From £6.87
|
From £8.24
|
|
|
131/3
|
|
131 Wall Plate Tube Clamp 42.4mm OD - Size 3
With 4 countersunk holes, this fitting is ideal as a flange to terminate handrail to a wall or other similar application. This fitting may be used on structures where it is only required as a positional fixing.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
- Size 1: 26.9mm OD
Equivalent product references:
- Interlink: 131
- Keeklamp: 61
- Fastclamp: C11
- Alvin: A10
Show Description
|
From £2.45
|
From £2.94
|
|
|
131S/3
|
|
131S Square Wall Plate Tube Clamp 42.4mm OD - Size 3
This design is ideal as a flange for terminating rails to a wall or similar structures. It can be used as a base flange for non load bearing structures.
If needed the tube can pass through the fitting completely
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Show Description
|
From £2.70
|
From £3.24
|
|
|
132/3
|
|
132 Base Plate Tube Clamp 42.4mm OD - Size 3
A structural base plate for all aspects of vertical post support. This fitting when used as a base plate for guardrailing should always be positioned with the holes across the line of the guardrail to give maximum strength. The holes in the base plate are large enough to enable the use of mechanical or chemical anchor fixings.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
- Size 1: 26.9mm OD
Equivalent product references:
- Interclamp: 132
- Keeklamp: 62
- Fastclamp: C12
- Alvin: A12
Show Description
|
From £4.74
|
From £5.69
|
|
|
133/3
|
|
133 Plastic Stop End Tube Clamp 42.4mm OD - Size 3
A plastic stop end for use in the end of tubes. The stop end can be used in either medium or heavy gauge tube. This is only a friction fit and for a more permanent fix an adhesive is recommended.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
- Size 1: 26.9mm OD
Equivalent product references:
- Interclamp: 133
- Keeklamp: 84
- Fastclamp: C65
- Alvin: A68
Place in hot water prior to fixing to avoid shattering/breaking.
Show Description
|
From £0.24
|
From £0.29
|
|
|
134/3
|
|
134 Ground Socket Tube Clamp 42.4mm OD - Size 3
A ground socket cast into concrete which is flush to the finished ground level. The upright is held in place using the grubscrew but can easily be removed without leaving any obstructions.
- Size4: 48.3mm OD
- Size3: 42.4mm OD
- Size2: 33.7mm OD
Show Description
|
From £15.54
|
From £18.65
|
|
|
135/3
|
|
135 Clamp On Tee Tube Clamp 42.4mm OD - Size 3
Inline Add on Tee. Used for making additions to, upgrading or modifying an existing structure without having the need to dismantle part or all of that structure.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 135
- Keeklamp: 16
- Fastclamp: C41
- Alvin: A32
Show Description
|
From £4.13
|
From £4.96
|
|
|
136/3
|
|
136 Add On Tee Tube Clamp 42.4mm OD - Size 3
The add on tee enables a structure to be extended, avoiding the need for dismantling.
Also available in:
WARNING: THIS CLAMP SHOULD NOT BE USED TO JOIN LENGTHS OF TUBE.
Equivalent product references:
- Interclamp: 136
- Keeklamp: A10
- Fastclamp: CA03
Show Description
|
From £4.13
|
From £4.96
|
|
|
138/3
|
|
138 Gate Eye Tube Clamp 42.4mm OD - Size 3
Female section of a 2 part gate hinge. Used in conjunction with fitting reference 140.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 138
- Keeklamp: 78
- Fastclamp: C31
- Alvin: A60
Show Description
|
From £1.85
|
From £2.22
|
|
|
140/3
|
|
140 Gate Hinge Tube Clamp 42.4mm OD - Size 3
Male section of a 2 part gate hinge. Used in conjunction with fitting reference 138.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 140
- Keeklamp: 83
- Fastclamp: C32
- Alvin: A62
Show Description
|
From £2.07
|
From £2.48
|
|
|
143/3
|
|
143 Wall Mount Tube Clamp for Handrail 42.4mm OD - Size 3
Wall mounting bracket for handrails. Can also be used to tie back structures to wall or to hold kicking plates on a guardrail. This fitting has countersunk holes and is not recommended as a structural fixing. This fitting has no ability to join tubes.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
- Size 1: 26.9mm OD
Equivalent product references:
- Interclamp: 143
- Keeklamp: 70
- Fastclamp: C16
- Alvin: A34
Show Description
|
From £3.03
|
From £3.64
|
|
|
144/3
|
|
144 Offset Side Palm Fixing Tube Clamp 42.4mm OD - Size 3
144-3 (C) Offset Side Palm Fixing Tube Clamp 42.4mm OD
Structural offset side palm base fixing guardrailing to walls, steps, ramps, etc. The tube is unable to pass through the fitting as supplied, should this be required then the base must be reamed out. Access to the top fixing is restricted. It is recommended that a threaded stud is fixed first with a maximum projection of 25mm.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product preferences:
- Interclamp: 144
- Keeklamp: 64
- Fastclamp: C13
- Alvin: A14
Show Description
|
From £6.57
|
From £7.88
|
|
|
145/3
|
|
145 Non Structural Offset Side Palm Fixing Tube Clamp 42.4mm OD - Size 3
145-3 (C) Non Structural Offset Side Palm Fixing Tube Clamp 42.4mm OD
This Tube Clamp is designed for palm fixing guardrailing and balustrading to walls, parapets, steps and ramps.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent Tubeclamp product references:
- Interclamp: 145
- Keeklamp: 65
- Fastclamp: C14
- Alvin: A16
Show Description
|
From £6.14
|
From £7.37
|
|
|
146/3
|
|
146 Flush Side Palm Fixing Tube Clamp 42.4mm OD - Size 3
Structural flush side palm base fixing for fixing guardrailing to wall steps or ramps etc. The flush design enables posts to be tight to the structure. The tube is unable to pass though the fitting. Should this be required then the base must be reamed out. If the base is reamed out the bottom fixing will become redundant.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 146
- Keeklamp: 68
- Fastclamp: C15
- Alvin: A15
Show Description
|
From £5.66
|
From £6.79
|
|
|
147/3
|
|
147 Offset Swivel Tee Tube Clamp 42.4mm OD - Size 3
An internal swivel tee used in conjunction with other fittings in the range to create a 360° swivel joint. Ideal use on handrail or offset guardrailing down variable angled slopes. Eliminates the requirement for specialised angle fittings.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 147
- Keeklamp: 114
- Fastclamp: C06
- Alvin: A31
Show Description
|
From £3.80
|
From £4.56
|
|
|
148/3
|
|
148 Short Swivel Inline Tee Tube Clamp 42.4mm OD - Size 3
Shown as a pair, priced and sold as a single fitting but normally used in pairs to create angles between 85° and 235°. A central tube is required to join the fittings together to create the angle. When working out the correct tube length care should be taken.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 148
- Keeklamp: 19
- Fastclamp: C25
- Alvin: A21
Show Description
|
From £2.85
|
From £3.42
|
|
|
149/3
|
|
149 Inline External Connector Tube Clamp 42.4mm OD - Size 3
An inline external tube connector for joining two tubes of the same diameter. This fitting is not recommended to be used in high load applications. For a smooth inline joint the fitting 150 can be used.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 149
- Keeklamp: 14
- Fastclamp: C00
- Alvin: A8
Show Description
|
From £2.46
|
From £2.95
|
|
|
150/3
|
|
150 Inline Internal Connector Tube Clamp 42.4mm OD - Size 3
An inline internal tube connector for joining two tubes of the same diameter. This fitting can only be used with 3.2mm thick tube. This fitting is not recommended for high or tensile load applications. For 4.0mm scaffold tube please use a standard joint pin from the conventional scaffolding page.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 150
- Keeklamp: 18
- Fastclamp: C01
- Alvin: A9
Show Description
|
From £2.37
|
From £2.84
|
|
|
158/3
|
|
158 4 Way Cross Tube Clamp 42.4mm OD - Size 3
A 4 way cross that enables the vertical to pass through the centre of the fitting with the 4 horizontal tubes joining at 90° to each other. Ideal for structures with multiple verticals. The vertical must remain continuous with the cross rails being cut.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 158
- Keeklamp: 40
- Fastclamp: C24
- Alvin: A26
Show Description
|
From £6.57
|
From £7.88
|
|
|
160/3
|
|
160 Offset Clamp on Tee Tube Clamp 42.4mm OD - Size 3
Offset add on tee. Used for making additions to, upgrading or modifying an existing structure without having the need to dismantle part or all of that structure.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 160
- Keeklamp: 17
- Fastclamp: C42
Show Description
|
From £2.01
|
From £2.41
|
|
|
161/3
|
|
161 Offset 90 Degree Crossover Tube Clamp 42.4mm OD - Size 3
A 90° offset crossover fitting. The tube is unable to be jointed within this fitting. Ideal applications are for racking systems or offset guardrail.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 161
- Keeklamp: 45
- Fastclamp: C40
- Alvin: A28
Show Description
|
From £2.33
|
From £2.80
|
|
|
165/3
|
|
165 Combination Socket Tube Clamp 42.4mm OD - Size 3
A combination fitting designed for use in the construction of racking systems. The fitting enables the connection of a vertical upright at 90° to 2 horizontal rails, one being the tie rail, the other being the load rail. On pallet racking the upright normally has the load rail on the inside, whilst for shelved racking the upright normally has the load rail on the outside.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 165
- Keeklamp: 46
- Fastclamp: C43
- Alvin: A30
Show Description
|
From £3.51
|
From £4.21
|
|
|
166/3
|
|
166 Adjustable Knuckle Tube Clamp 42.4mm OD - Size 3
A versatile fitting, often used where a horizontal rail is joined to a sloping section. Once the desired angle is obtained, the knuckle is secured with a standard setscrew
Show Description
|
From £8.85
|
From £10.62
|
|
|
167/3
|
|
167 Double Inline Swivel Tube Clamp 42.4mm OD - Size 3
Complete double swivel with the swivel connectors at 180° to each other. Each swivel has a travel of approximately 85° from the horizontal on both vertical directions.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 167
- Keeklamp: C51
- Fastclamp: C47
- Alvin: A46
Show Description
|
From £6.59
|
From £7.91
|
|
|
167M/3
|
|
167M Double Male Inline Swivel Tube Clamp 42.4mm OD - Size 3
A double male fitting with the lugs at 180° to each other.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 167M
- Keeklamp: M51
- Fastclamp: C37
- Alvin: A38
Show Description
|
From £2.39
|
From £2.87
|
|
|
168/3
|
|
168 Corner Swivel Tube Clamp 42.4mm OD - Size 3
Complete double swivel with the swivel connectors at 90° to each other. Each swivel has a travel of approximately 85° from the horizontal on both vertical directions.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 168
- Keeklamp: C52
- Fastclamp: C48
- Alvin: A48
Show Description
|
From £7.23
|
From £8.68
|
|
|
168M/3
|
|
168M Male Corner Swivel Tube Clamp 42.4mm OD - Size 3
90° Male Corner Swivel, double male fitting with the 2 lugs at 90° to each other.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 168M
- Keeklamp: M52
- Fastclamp: C38
- Alvin: A40
Show Description
|
From £3.02
|
From £3.62
|
|
|
169/3
|
|
169 Swivel Locating Flange Tube Clamp 42.4mm OD - Size 3
Complete locating swivel. Swivel has a travel of approximately 85° from the vertical in each direction.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 169
- Keeklamp: C58
- Fastclamp: C46
- Alvin: A52
Show Description
|
From £4.07
|
From £4.88
|
|
|
170/3
|
|
170 Single Mesh Panel Clip Tube Clamp 42.4mm OD - Size 3
Single location weldmesh panel clip. The slotted design of the panel clip enables adjustment in the location of the mesh panels. Supplied with M6 x 30mm long nut and bolt.This fitting can also be used to locate other materials up to 10mm thick provided the safety saddle is removed.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 170
- Keeklamp: 81
- Fastclamp: C66
- Alvin: A70
Show Description
|
From £0.71
|
From £0.85
|
|
|
171/3
|
|
171 Double Mesh Panel Clip Tube Clamp 42.4mm OD - Size 3
Double location weldmesh panel clip. The slotted design of the panel clip enables adjustment in the location of the mesh panels. Supplied with M6 x 30mm long nut and bolt. This fitting can also be used to locate other materials up to 10mm thick provided the safety saddle is removed.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 171
- Keeklamp: 82
- Fastclamp: C67
- Alvin: A72
Show Description
|
From £1.02
|
From £1.22
|
|
|
173/3
|
|
173 Single Swivel Tube Clamp 42.4mm OD - Size 3
Complete single swivel. The swivel has a travel of approximately 85° from the horizontal in both vertical directions.
Also available in:
- Size 4: 48.3mm
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 173
- Keeklamp: C50
- Fastclamp: C45
- Alvin: A44
Show Description
|
From £3.72
|
From £4.46
|
|
|
173F/3
|
|
173F Female Swivel Tube Clamp 42.4mm OD - Size 3
This fitting is designed to be used in conjunction with the ‘M’ fittings and is not generally used on its own. This can be connected to the ‘M’ fitting by either rivet or nut and bolt.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
- Size 1: 26.9mm OD
Equivalent product references:
- Interclamp: 173F
- Keeklamp: F50
- Fastclamp: C36
- Alvin: A42
Show Description
|
From £2.12
|
From £2.54
|
|
|
173M/3
|
|
173M Single Male Swivel Tube Clamp 42.4mm OD - Size 3
Single male fitting with only 1 lug.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 173M
- Keeklamp: M50
- Fastclamp: C35
- Alvin: A36
Show Description
|
From £1.65
|
From £1.98
|
|
|
176/3
|
|
176 3 Way Outlet Tee Tube Clamp 42.4mm OD - Size 3
3 way tee used to join 3 tubes at 90° to each other with the vertical passing through the fitting. Typical use would be on structures such as market stall or play frames.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
- Size 1: 26.9mm OD
Equivalent product references:
- Interclamp: 176
- Keeklamp: 35
- Fastclamp: C23
- Alvin: A24
Show Description
|
From £4.46
|
From £5.35
|
|
|
179/3
|
|
179 Locking Collar Tube Clamp 42.4mm OD - Size 3
A locking collar used as an extra support for a fitting on structures where the slip load on the grub screw may be exceeded, ie: racking. Can also be used to support a fitting that is required to be left undone, ie: a gate hinge.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
- Size 1: 26.9mm OD
Equivalent product references:
- Interclamp: 179
- Keeklamp: 75
- Fastclamp: C30
- Alvin: A58
Show Description
|
From £1.56
|
From £1.87
|
|
|
182/3
|
|
182 Hook Tube Clamp 42.4mm OD - Size 3
Chain hook. Used to locate chains across openings. Not ideal for permanent chain location. Recommended that one end of the chain is fixed using a fitting reference 173M and held in place with a nut and bolt.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 182
- Keeklamp: 76
- Fastclamp: C33
- Alvin: A64
Show Description
|
From £1.82
|
From £2.18
|
|
|
184/3
|
|
184 Metal Plug Tube Clamp 42.4mm OD - Size 3
Metal Plug - Tube Cap
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 333
- Keeklamp: 84
Show Description
|
From £1.34
|
From £1.61
|
|
|
198/3
|
|
198 Fixing Bracket Double Sided Tube Clamp 42.4mm OD - Size 3
Wall mounting bracket for handrails. Can also be used to tie back structures to wall or to hold kicking plates on a guardrail. This fitting has countersunk holes and is not recommended as a structural fixing. This fitting has no ability to join tubes.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
Hole size approx 10mm.
Show Description
|
From £3.03
|
From £3.64
|
|
|
199/3
|
|
199 Fixing Bracket Single Sided Tube Clamp 42.4mm OD - Size 3
Wall mounting bracket for handrails. Can also be used to tie back structures to wall or to hold kicking plates on a guardrail. This fitting has countersunk holes and is not recommended as a structural fixing. This fitting has no ability to join tubes.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 199
- Fastclamp: C34
Hole size approx 10mm.
Show Description
|
From £2.15
|
From £2.58
|
|
|
201/3
|
|
201 Slope Range Short Tee Tube Clamp 42.4mm OD - Size 3
New Product coming soon
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 153
- Keeklamp: 86
- Fastclamp: C51
- Alvin: G02
Show Description
|
From £3.29
|
From £3.95
|
|
|
204/3
|
|
204 Slope Range Long Tee Tube Clamp 42.4mm OD - Size 3
Slope Range Long Tee Tubeclamp
An adjustable tee connection between two tubes. Used on ramps and shallow gradient guardrail between verticals and top rails. This fitting can be used to joint tubes in the long tee.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 155
- Keeklamp: 88
- Fastclamp: C52
- Alvin: G04
Show Description
|
From £4.94
|
From £5.93
|
|
|
219/3
|
|
219 Slope Range Socket Cross Tube Clamp 42.4mm OD - Size 3
Slope Range Socket Cross 0° to 11°
An adjustable cross for connecting tubes between mid/lower rails and the vertical on ramps or shallow gradients. The vertical must remain continuous with the cross rails being cut.
Also available in:
- Size 3: 42.4mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 156
- Keeklamp: 89
- Fastclamp: C54
- Alvin: G22
Show Description
|
From £4.46
|
From £5.35
|
|
|
224/3
|
|
224 Variable Angle Connector Tube Clamp 42.4mm OD - Size 3
A variable angle in line connector – 15-60°. Ideally suited for use between the vertical end post and sloping top rail on stair guard railing.
Equivalent product references:
- Interclamp: 124
- Keeklamp: 55-8
- Fastclamp: C05
- Alvin: A7
Show Description
|
From £4.37
|
From £5.24
|
|
|
225/3
|
|
225 Slope Range Elbow Tube Clamp 42.4mm OD - Size 3
Slope Range Elbow - 0° to 11°
An adjustable elbow. Used for the connection of the first vertical post at the start of the incline to the top rail. Only one barrel has the ability to take the adjustability, the other is fixed.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 154
- Keeklamp: 87
- Fastclamp: C50
- Alvin: G06
Show Description
|
From £3.95
|
From £4.74
|
|
|
232/3
|
|
232 Slope Range Base Tube Clamp 42.4mm OD - Size 3
Slope Range Base - 0° to 11°
An adjustable structural base fitting for the vertical. The design of this fitting will only allow it to be installed in the correct plane.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Equivalent product references:
- Interclamp: 152
- Keeklamp: 67
- Fastclamp: C53
- Alvin: G12
Show Description
|
From £5.04
|
From £6.05
|
|
|
252N/3
|
|
252N Narrow Slope Base Flange 0-11° Tube Clamp 42.4mm OD - Size 3
Narrow Slope Range Base 0° to 11°
A narrow adjustable structural base fitting for the vertical, where a standard 232 fitting is too wide. The design of this fitting will only allow it to be installed in the correct plane.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Show Description
|
£8.10
|
£9.72
|
|
|
247/3
|
|
247 Base Flange Tube Clamp with Kick Plate 42.4mm OD - Size 3
Ideal for guardrailing and balustrading applications where the addition of a kick plate is required. The slotted holes allow for adjustment and ease of fitting.
Please note: Due to the nature of these galavanised castings the measurements given here cannot be precise. We therefore do not recommend that any bolt holes are pre-drilled prior to installation of these fittings.
Also available in:
Equivalent product references:
- Keeklamp: 69
- Fastclamp: C18
Show Description
|
From £10.37
|
From £12.44
|
|
|
101/4/2
|
|
101 Reducing Short Tee Tube Clamp - Size 4 to Size 2
101/4/2 Tube Clamp ia a 90° tee connection between two tubes, 48.3mm OD and 33.7mm OD. Typical use of this Tube Clamp is on straight and level handrail / guardrail to connect the vertical to the top rail or end/mid rail to the vertical.
Also available in:
- Size 3 to 2 : 42.4mm to 33.7mm OD
- Size 4 to 3 : 48.3mm to 42.4mm OD
Show Description
|
From £3.11
|
From £3.73
|
|
|
101/4/3
|
|
101 Reducing Short Tee Tube Clamp - Size 4 to Size 3
101/4/3 Tube Clamp ia a 90° tee connection between two tubes, 48.3mm OD and 42.4mm OD. Typical use of this Tube Clamp is on straight and level handrail / guardrail to connect the vertical to the top rail or end/mid rail to the vertical.
Also available in:
- Size 3 to 2 : 42.4mm to 33.7mm OD
Show Description
|
From £3.11
|
From £3.73
|
|
|
101/3/2
|
|
101 Reducing Short Tee Tube Clamp - Size 3 to Size 2
101/3/2 Tube Clamp ia a 90° tee connection between two tubes, 42.4mm OD and 33.7mm OD. Typical use of this Tube Clamp is on straight and level handrail / guardrail to connect the vertical to the top rail or end/mid rail to the vertical.
Also available in:
- Size 4 to 3 : 48.3mm to 42.4mm OD
Show Description
|
From £1.67
|
From £2.00
|
|
|
161/4/3
|
|
161 Offset Crossover Reducing Tube Clamp Size 4 to Size 3
A 90° offset reducing crossover fitting. The tube is unable to be jointed within this fitting. Ideal applications are for racking systems or offset guardrail where two different size tubes are being used
Also available in:
- Size 4: 48.3mm OD to Size 2: 33.7mm OD
Show Description
|
From £3.63
|
From £4.36
|
|
|
GS/4
|
|
Grub Screw - Size 4/3
Electro plated case hardened grub screws. These grub screws are supplied pre fitted into the fittings.
Grub screw available in Size 4/3 and 2/1.
Show Description
|
From £0.53
|
From £0.64
|
|
|
235/4
|
|
Allen Key - Size 4/3
Hexagonal key. The allen key is the only tool required to tighten up a fitting. The use of the duel ratchet fitting reference 233 is recommended to achieve the required torque.
Also available in:
Size 2/1
Show Description
|
£1.50
|
£1.80
|
|
|
233
|
|
Tube Clamp Ratchet - Universal
The ratchet comes with 2 hexagon socket heads to enable the complete range of fittings to be tightened. The use of the ratchet enables the grubscrews to be tightened to the correct torque.
- 8mm Hex Head for Size 4 and 3 Tube Clamps
- 6mm Hex Head for Size 2 and 1 Tube Clamps
- High Quality Teng Tools Ratchet
Show Description
|
£49.95
|
£59.94
|
|
|
050753U
|
|
75mm Castor Wheel Unbraked 42.4mm OD - Size 3
A 75mm Dia TPR on Polypropylene centre wheel unbraked swivel castor complete with Expander to fit 42.4mm OD / Size 3 Tubeclamp tube
Safe Working Load: 75 kg per castor
Tread Size: 25mm
Hub: 28mm
Bore: 8mm
Bolt Hole Size: 11mm
Overall Height: 100mm
Also available in tube sizes and Dia 100mm
- Size 4 : 48.3mm OD
- Size 2 : 33.7mm OD
- Size 1 : 26.9mm OD
Show Description
|
£4.85
|
£5.82
|
|
|
050753B
|
|
75mm Castor Wheel Braked 42.4mm OD - Size 3
A 75mm Dia TPR on Polypropylene centre wheel braked swivel castor complete with Expander to fit 42.4mm OD / Size 3 Tubeclamp tube
Safe Working Load: 75 kg per castor
Tread Size: 25mm
Hub: 28mm
Bore: 8mm
Bolt Hole Size: 11mm
Overall Height: 100mm
Also available in tube sizes and Dia 100mm
- Size 4 : 48.3mm OD
- Size 2 : 33.7mm OD
- Size 1 : 26.9mm OD
Show Description
|
£8.50
|
£10.20
|
|
|
051003U
|
|
100mm Castor Wheel Unbraked 42.4mm OD - Size 3
A 100mm Dia TPR on Polypropylene centre wheel unbraked swivel castor complete with Expander to fit 42.4mm OD / Size 3 Tubeclamp tube
Safe Working Load: 100 kg per castor
Tread Size: 32mm
Hub: 36mm
Bore: 12mm
Bolt Hole Size: 11mm
Overall Height: 135mm
Also available in tube sizes and Dia 100mm
- Size 4 : 48.3mm OD
- Size 2 : 33.7mm OD
- Size 1 : 26.9mm OD
Show Description
|
£5.90
|
£7.08
|
|
|
051003B
|
|
100mm Castor Wheel Braked 42.4mm OD - Size 3
A 100mm Dia TPR on Polypropylene centre wheel braked swivel castor complete with Expander to fit 42.4mm OD / Size 3 Tubeclamp tube
Safe Working Load: 100 kg per castor
Tread Size: 32mm
Hub: 36mm
Bore: 12mm
Bolt Hole Size: 11mm
Overall Height: 135mm
Also available in tube sizes and Dia 100mm
- Size 4 : 48.3mm OD
- Size 2 : 33.7mm OD
- Size 1 : 26.9mm OD
Show Description
|
£10.00
|
£12.00
|
|
|
246/3
|
|
246 Horizontal Railing Base Tube Clamp 42.4mm OD - Size 3
Designed for palm fixing of guardrail and balustrades to walls, parapets, steps and ramps. The upright cannot drop through the socket.
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
Also available in:
- Size 4: 48.3mm OD
- Size 2: 33.7mm OD
Show Description
|
From £6.60
|
From £7.92
|
|
